Universal hand-held tachometer C118 for mobile use
These Portable Tachometers utilize the signal from one of our optoelectronic, inductive or Hall-Effect sensors. The sensor may be attached directly to the Hand-Tachometer by the plug or via a flexible cable.
This mobile unit provides an easy to use and a trouble-free application coupled with maximum efficiency. A wide range of sensors is available subject to requirements.
C118
Mobile Monitor C118 for Detection of Speed
- 6 digit LCD Display
- Frequency range 0 Hz...100 kHz
- Signal Input for sensors A1S30 or A1S36 (optoelectronic), A1S37 (Laser), A2S04 (magnet-inductive), A5S0 (Differential-Hall-Effect) as well as wheel pulse transmitters A1L04 or A1L05
- 1 Analog Output 0...4 V
- 1 TTL Pulse Output
- RS232 Data Interface (optional)
Optoelectronic Sensors (Accessory)
A1S30
Sensor A1S30, suitable for most applications
- Power supply by C118
- Sensing distance 1...2 cm
- Signal range 10...15.000 pulses/s
- Operating temperature 0...50 °C
- Best measurements obtainable when using self-adhesive reflecting foil U1A006
- A choice of 2 shaft lengths available (35 or 95 mm)
A1S36
Sensor A1S36 for use in difficult conditions, for example in wet areas
- Power supply by C118
- Sensing distance 1...10 cm
- Signal range 10...15.000 pulses/s
- Operating temperature 0...60 °C
- Best measurements obtainable when using self-adhesive reflecting foil U1A006
- A choice of 2 shaft lengths available (35 or 95 mm)
- A choice of two cable lengths (2 m or 5 m)
A1S37
Laser-Reflection Sensor A1S37 for extended sensing distance
- Power supply by C118
- Sensing distance up to 2 meters through a narrow gap or pane of glass
- Signal range 10...15.000 pulses/s
- Operating temperature 0...50 °C
- Marking with our self-adhesive reflecting foil (U1A006) is required
- Light Source: Red laser (ca. 645 nm), < 1 mW, Protection Class 2
Wheel Pulse Transmitters (Accessory)
A1L04B200
Wheel Pulse Transmitter A1L04B200 for speed measurement on moving conveyor belts and on roll surface
- Speed range 0...1200 m/min.
- 2 wheels each with a circumference of 200 mm
- Resolution 1000 pulses/m
- Operating temperature 0...50 °C
A1L05B500-5V
Wheel Pulse Transmitter A1L05B500 for speed measurement on moving conveyor belts and on roll surface
- Speed range 0…3000 m/min.
- 2 wheels each with a circumference of 500 mm
- Resolution 1000 pulses/m
- Operating temperature 0…50 °C
